Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › YAW RATE AND DECELERATION SENSOR
RM24M0E _54 Brake _059583 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0292154 YAW RATE AND DECELERATION SENSOR G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  YAW RATE AND DECELERATION SENSOR  INSPECTION  


PROCEDURE

Hide 89183A 1.INSPECT YAW RATE SENSOR

a.

Inspect the yaw rate sensor. If any of the following occurs, replace the yaw rate sensor with a new one.

·

The surface of the sensor is cracked, dented, or chipped.

·

The connector or wire harness is scratched, cracked, or damaged.

·

The sensor has been dropped.