Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ANTI-LOCK BRAKE SYSTEM › 2014.09–2016.05
RM24M0E _54 Brake _059583 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0292157 ANTI-LOCK BRAKE SYSTEM D

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ANTI-LOCK BRAKE SYSTEM  SYSTEM DESCRIPTION  


FUNCTION DESCRIPTION


a.

Anti-lock Brake System (ABS)

i.

The ABS helps prevent the wheels from locking when the brakes are applied firmly or on a slippery surface.



b.

Electronic Brake Force Distribution (EBD)

i.

The EBD control utilizes the ABS to realize the proper brake force distribution between the front and rear wheels in accordance with the driving conditions and vehicle load. In addition, when brakes are applied while cornering, it also controls the braking forces of the right and left wheels, helping to maintain vehicle stability.




FUNCTION OF COMPONENTS


Component Function
Brake Actuator
·

Consists of the reduction solenoid valve, holding solenoid valve, pump motor and reservoir, and adjusts the brake fluid pressure applied to each wheel cylinder.

·

Houses the skid control ECU.


Brake Actuator Skid Control ECU Processes the signals from each sensor to control the ABS.
Speed Sensor Detects the wheel speed and sends the signal to the skid control ECU.
Combination Meter ABS Warning Light
·

Illuminates to inform the driver that a malfunction in the ABS has occurred.

·

Blinks to indicate DTCs that relate to the ABS.


Brake Warning Light
·

Illuminates to inform the driver that the parking brake is ON when the system is normal, and when the brake fluid has decreased.

·

Illuminates to inform the driver that a malfunction in the EBD has occurred.