FAIL SAFE OPERATION
If there is a problem with any sensor signals or actuator systems, the skid control ECU prohibits the power supply to the brake actuator.
ABS control is prohibited, but EBD control continues as long as possible. If EBD control is impossible, the brake warning light comes on to warn the driver (see page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ANTI-LOCK BRAKE SYSTEM>DIAGNOSIS SYSTEM).
If system components have any malfunctions before starting control, the operation stops immediately. If system components have any malfunctions during control, the control stops gradually so as not to trigger a sudden change in vehicle conditions.
If it is impossible to control the systems, the warning light comes on to inform the driver of malfunctions in the systems (see page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ANTI-LOCK BRAKE SYSTEM>DIAGNOSIS SYSTEM).
If the ABS system malfunctions, the brake system operates normally without the ABS system.
If the brake actuator malfunctions, a gradual loss of brake performance is expected, and ABS system control is prohibited.
| Malfunction Area | Fail-Safe Operation |
|---|---|
| ABS system | ABS control prohibited |
| EBD system | ABS and EBD control prohibited |