Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM › 2013.04–2014.09
RM24M0E _54 Brake _059583 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0292158 VEHICLE STABILITY CONTROL SYSTEM C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VEHICLE STABILITY CONTROL SYSTEM  43  ABS Control System Malfunction  


DESCRIPTION

This DTC is output when the VSC system detects a malfunction in the ABS system.

DTC No. DTC Detection Condition Trouble Area
C1223/43 Malfunction in ABS control system Skid control ECU

PROCEDURE

1.CHECK DTC FOR ABS SYSTEM

b.

Turn the engine switch on (IG).


c.

Check if the same DTC is recorded (see page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC is output A
DTC is not output B



A

REPAIR CIRCUIT INDICATED BY OUTPUT

B

END