Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › DECELERATION SENSOR › 2013.04–2014.09
RM24M0E _54 Brake _059583 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0292160 DECELERATION SENSOR G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  DECELERATION SENSOR  INSPECTION  


PROCEDURE

Hide 89441A 1.INSPECT DECELERATION SENSOR

a.

Inspect the deceleration sensor. If any of the following occurs, replace the deceleration sensor with a new one.

·

The surface of the sensor is cracked, dented, or chipped.

·

The connector or wire harness is scratched, cracked, or damaged.

·

The sensor has been dropped.