Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE ACTUATOR(for 2AZ-FE with VSC) › 2013.04–2014.09
RM24M0E _54 Brake _059583 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0292162 BRAKE ACTUATOR(for 2AZ-FE with VSC) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE ACTUATOR(for 2AZ-FE with VSC)  REASSEMBLY  


PROCEDURE

Hide 44540 1.INSTALL ABS AND TRACTION ACTUATOR ASSEMBLY

NOTICE:

Do not remove the hole plugs before connecting the brake lines. New actuators are filled with brake fluid.


a.
C130702E01
2.289,1.539 3.230,1.723 0.941,0.184 10 No. 2 Bracket 2.189,1.298 2.601,1.459 2.601,1.459 2.601,1.522 false

Install the No. 2 brake actuator bracket to the actuator with the 3 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


b.
C130701E01
2.687,1.178 3.218,1.343 0.531,0.165 10 Bracket 2.435,1.419 2.624,1.275 false

Install the brake actuator bracket assembly to the No. 2 brake actuator bracket (with actuator) with the 3 nuts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)