Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › REAR SPEED SENSOR
RM24M0E _54 Brake _059583 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0292163 REAR SPEED SENSOR G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  REAR SPEED SENSOR  INSPECTION  


PROCEDURE

Hide 89546 1.INSPECT SKID CONTROL SENSOR

a.

Check the speed sensor. If any of the following occurs, replace the speed sensor with a new one.

·

The surface of the speed sensor is cracked, dented, or chipped.

·

The speed sensor has been dropped.



Hide 89516 2.INSPECT SKID CONTROL SENSOR WIRE

a.

Check the sensor wire. If any of the following occurs, replace the sensor wire with a new one.

The connector or wire harness is scratched, cracked, or damaged.