88539K
1.REMOVE DRAIN COOLER HOSE
Remove the drain hose from the air conditioning unit.
87710G
2.REMOVE PTC HEATER ASSEMBLY (for Cold Area)
Remove the 2 screws and PTC heater.
87106L
3.REMOVE DAMPER SERVO SUB-ASSEMBLY
Disconnect the 2 connectors.
Remove the 3 screws and damper servo.
87106V
4.REMOVE NO. 2 AIR MIX DAMPER SERVO SUB-ASSEMBLY
Disconnect the connector.
Remove the 2 screws and air mix damper servo.
87107A
5.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
Remove the screw and clamp.
Detach the 4 claws and remove the heater clamp.
Remove the heater radiator unit from the air conditioning unit.
88515
6.REPAIR COOLER EXPANSION VALVE
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.
Remove the cooler expansion valve.
88501
7.REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
Remove the 6 screws.
Detach the 4 claws and remove the plate cover.
Disconnect the clamp and remove the cooler evaporator with cooler thermistor.
Remove the 2 O-rings from the cooler evaporator.
88625
8.REMOVE EVAPORATOR TEMPERATURE SENSOR
Disconnect the sensor clamp from the cooler evaporator.