Home › Vehicle Interior › AIR CONDITIONING › REAR BLOWER RESISTOR(for Cooler)
RM24M0E _58 Vehicle Interior _059584 AIR CONDITIONING _0292175 REAR BLOWER RESISTOR(for Cooler) G

AIR CONDITIONING  REAR BLOWER RESISTOR(for Cooler)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 88750B 1.INSPECT BLOWER RESISTOR TRANSISTOR ASSEMBLY (for Manual Air Conditioning System)

a.
E032877

Measure resistance between terminals 3 and 4.

Standard resistance:

2.0 to 2.4 kΩ


If resistance is not as specified, replace the blower resistor transistor assembly.


b.

Inspect blower resistor transistor assembly.

i.

Connect the positive (+) lead to terminal 4 through a 12 V to 3.4 W test bulb and negative (-) lead to terminal 2.


ii.

Check the test bulb lights up when another positive (+) lead is connected to terminal 2 through a 12 V to 3.4 W test bulb.

If operation is not as specified, replace the blower resistor transistor assembly.