GENERAL
The air conditioning system has the following features:
An automatic, dual-control air conditioner system comprising front/rear independent temperature control is used.
The No. 2 ion generator sub-assembly emits "nanoe" ions that are electrically charged and encapsulated with water. The ions are discharged into the cabin through the driver side vent to provide skin-friendly clean air.
"nanoe" is a trademark of Panasonic Electric Works Co., Ltd.
In accordance with the temperature set using the temperature control switch, the air conditioning amplifier determines the outlet temperature based on the input signals from various sensors. In addition, corrections are made in accordance with the signals from the engine coolant temperature sensor to control the outlet air temperature.
The blower motor is controlled automatically in accordance with the airflow volume determined by the air conditioning amplifier based on the input signals from various sensors.
In accordance with the outlet mode ratio that is determined by the air conditioning amplifier based on the input signals from various sensors, this system automatically changes the outlets.
Based on the signals from the ambient temperature sensor, this system calculates the outside temperature and indicates it in the multi-information display in the combination meter.
The left/right independent temperature control and neural network control make air conditioner control available to suit the persons in both the driver seat and in the passenger seat individually.
The Positive Temperature Coefficient (PTC) heater system contains a PTC heater that heats the air that has passed through the heater core to ensure proper heater performance.
A combustion type power heater is available as optional equipment to provide comfortable heater performance in cold areas.
The rear defogger and outside rear mirror heaters are turned on for 15 minutes when the rear defogger switch is pressed. The system turns the rear mirror heaters them off if the switch is pressed while they are operating.
Panel diagnosis is possible through operation of the air conditioner switches.
The air conditioning amplifier has the function of controlling the indicator lighting.
MODE POSITION AND DAMPER OPERATION
| Control Damper | Control Position | Damper Position | Operation | |
|---|---|---|---|---|
| Air Inlet Control Damper | FRESH | A | Brings in fresh air. | |
| RECIRC | B | Recirculates internal air. | ||
| Air Mix Control Damper
(Left/Right Independent Control) |
Driver and Front Passenger Side | MAX COOL to MAX HOT
(TEMP. SETTING 18 to 32°C (65 to 85°F)) |
C, D, E | Varies mixture ratio of fresh air and recirculation air in order to regulate temperature continuously between hot and cold. |
| Mode Control Film Damper | Driver and Front Passenger Side | FACE
|
I, J, L, P, U | Air blows out of center registers and side registers. |
BI-LEVEL
|
I, Q, M, R, T | Air mainly blows out of center registers, side registers, and footwell register ducts. | ||
FOOT
|
H, K, N, O, S | Air mainly blows out of front and rear footwell register ducts. In addition, air blows out slightly from center and side defrosters, and side registers. | ||
FOOT/DEF
|
G, K, N, O, T | Air mainly blows out of center and side defrosters to defrost windshield. Air also blows out from front and rear footwell register ducts, and side registers. | ||
DEF
|
F, K, N, O, U | Air blows out of center and side defrosters and side registers to defrost windshield. | ||
| Control Damper | Control Position | Damper Position | Operation |
|---|---|---|---|
| Air Mix Control Damper | MAX COOL to MAX HOT (TEMP. SETTING 18 to 32°C (65 to 85°F)) | D, E | Varies mixture ratio of fresh air and recirculation air in order to regulate temperature continuously between hot and cold. |
| Mode Control Film Damper | FACE
|
A | Air blows out of rear roof side register ducts. |
BI-LEVEL
|
B | Air blows out of rear roof side register ducts and rear footwell register ducts. | |
FOOT
|
C | Air blows out of rear footwell register ducts. |
AIR OUTLET AND AIRFLOW VOLUME
The circle size (○) indicates the proportion of the flow volume.
| Air Outlet Mode | Air Outlet Position Symbol | ||||
|---|---|---|---|---|---|
| A | B | C | D | ||
| Center Face | Side Face | Foot | Defroster | ||
|
FACE |
|
|
X | X |
|
BI-LEVEL |
|
|
|
X |
|
FOOT | X |
|
|
|
|
FOOT/DEF | X |
|
|
|
|
DEF | X |
|
X |
|
The circle size (○) indicates the proportion of the flow volume.
| Air Outlet Mode | Air Outlet Position Symbol | ||
|---|---|---|---|
| A | B | ||
| Side Face | Rear Foot | ||
|
FACE |
|
X |
|
BI-LEVEL |
|
|
|
FOOT | X |
|
PARKING FRESH CONTROL
When the vehicle is parked, the air conditioning unit uses control logic which automatically changes the air inlet to FRESH mode to purge undesired odors from the air conditioning unit.
This control will therefore reduce undesired odors upon starting the air conditioning system.