CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
| Display (Item) | Default | Contents | Setting |
|---|---|---|---|
| Set Temperature Shift | Normal | To control with shifted temperature against displayed temperature | -2C / -1C / Normal / +1C / +2C |
| Evaporator Control | Automatic | Function to set evaporator control to AUTOMATIC position (AUTO) to save power, or to coldest position (MANUAL) to dehumidify air and to prevent windows from fogging up | Automatic / Manual |
| Compressor Mode | Automatic | Function to automatically turn A/C ON by pressing AUTO button when blower is ON and A/C is OFF | Automatic / Manual |
| Air Inlet Mode | Automatic | Function to shift from INLET mode to RECIRCULATION mode when A/C is turned on | Automatic / Manual |
| Foot / DEF Auto Mode | ON | Function to automatically turn airflow from FOOT/DEF ON when AUTO MODE is ON | ON / OFF |
| Foot / DEF Automatic Blow Up Function | ON | Function to automatically increase blower level when defroster is ON | ON / OFF |
| Ambient Temperature Shift | Normal | To control with shifted temperature against displayed temperature | -3C / -2C / -1C / Normal / +1C / +2C / +3C |
CUSTOMIZING USING THE MULTI-DISPLAY
Turn the engine switch on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle customization / Climate settings.
Select the setting by referring to the table below.
| Display (Item) | Default | Contents | Setting |
|---|---|---|---|
| Auto A/C mode | On | Function to automatically turn A/C ON by pressing AUTO button when blower is ON and A/C is OFF | On or Off |
| Efficient ventilation mode | On | Function to shift from INLET mode to RECIRCULATION mode when A/C is turned on | On or Off |