Home › Vehicle Interior › AIR CONDITIONING › AIR CONDITIONING SYSTEM › from 2016.05
RM24M0E _58 Vehicle Interior _059584 AIR CONDITIONING _0292180 AIR CONDITIONING SYSTEM D

AIR CONDITIONING  AIR CONDITIONING SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZING FUNCTION WITH GTS


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



Air conditioning system
Display (Item) Default Contents Setting
Set Temperature Shift Normal To control with shifted temperature against displayed temperature -2C / -1C / Normal / +1C / +2C
Evaporator Control Automatic Function to set evaporator control to AUTOMATIC position (AUTO) to save power, or to coldest position (MANUAL) to dehumidify air and to prevent windows from fogging up Automatic / Manual
Compressor Mode Automatic Function to automatically turn A/C ON by pressing AUTO button when blower is ON and A/C is OFF Automatic / Manual
Air Inlet Mode Automatic Function to shift from INLET mode to RECIRCULATION mode when A/C is turned on Automatic / Manual
Foot / DEF Auto Mode ON Function to automatically turn airflow from FOOT/DEF ON when AUTO MODE is ON ON / OFF
Foot / DEF Automatic Blow Up Function ON Function to automatically increase blower level when defroster is ON ON / OFF
Ambient Temperature Shift Normal To control with shifted temperature against displayed temperature -3C / -2C / -1C / Normal / +1C / +2C / +3C
Ion Generate Control*1 ON Function to generate ions is stopped when item is OFF ON / OFF
Outside Air Mode Auto Switch Function*2 ON Function to automatically change the air inlet to FRESH mode when the vehicle is parked ON / OFF

*1: w/ Ion Generator Assembly

*2: except China, G. C. C. countries



CUSTOMIZING USING THE MULTI-DISPLAY


a.

Turn the engine switch on (IG).


b.

Enter the following menus: SETUP / Vehicle / Vehicle customization / Climate settings.


c.

Select the setting by referring to the table below.

Air conditioning system
Display (Item) Default Contents Setting
Auto A/C mode On Function to automatically turn A/C ON by pressing AUTO button when blower is ON and A/C is OFF On or Off
Efficient ventilation mode On Function to shift from INLET mode to RECIRCULATION mode when A/C is turned on On or Off



CUSTOMIZE CONTROL PANEL (for RHD)


a.

Customize switch response time

i.

Turn the engine switch on (IG).


ii.

Press the DUAL switch and AUTO switch simultaneously for 3 seconds.


iii.

A number is displayed on the front passenger side of the LCD screen. Press the REAR DEF switch to change the setting.

NOTICE:

The LCD screen completely illuminates if no operation is performed for 5 seconds after customize settings are set. Do not turn the engine switch off while the screen is illuminated, as settings are being saved.


HINT:

If the engine switch is turned off while the screen is illuminated, settings are reset.


Item Default Setting Switch Response Time ECU
·

Driver Side TEMP Switch

·

Passenger Side TEMP Switch

·

DUAL Switch

·

Blower Down Switch

·

Recirculation/Fresh Switch

·

A/C Switch


Other Switches
(Except Driver Side TEMP Switch, Passenger Side TEMP Switch, DUAL Switch, Blower Down Switch, Recirculation/Fresh Switch, A/C Switch)
Switch response time 02 01 0.04 seconds 0.04 seconds Air conditioner panel sub-assembly
02 0.06 seconds 0.06 seconds
03 0.08 seconds 0.10 seconds
04 0.10 seconds 0.14 seconds
05 0.12 seconds 0.16 seconds



b.

Customize switch response sound

i.

Turn the engine switch on (IG).


ii.

Press the AUTO switch and REAR switch simultaneously for 3 seconds.


iii.

"On" or "OFF" is displayed on the front passenger side of the LCD screen. Press the REAR DEF switch to change the setting.

NOTICE:

The LCD screen completely illuminates if no operation is performed for 5 seconds after customize settings are set. Do not turn the engine switch off while the screen is illuminated, as settings are being saved.


HINT:

If the engine switch is turned off while the screen is illuminated, settings are reset.


Item Default Setting Switch Response Sound ECU
Switch Response Sound On On On Air conditioner panel sub-assembly
OFF OFF



c.

Customize switch sensitivity level

i.

Turn the engine switch on (IG).


ii.

Press and hold the REAR DEF switch within 5 seconds after turning the engine switch on (IG) and operate the dimmer switch as follows:

High → Low → High → Low → High → Low


iii.

"01", "02" or "03" is displayed on the front passenger side of the LCD screen and "001" is displayed on the driver side of the LCD screen. Press the REAR DEF switch to change the setting.

NOTICE:

The LCD screen completely illuminates if no operation is performed for 5 seconds after customize settings are set. Do not turn the engine switch off while the screen is illuminated, as settings are being saved.


HINT:

If the engine switch is turned off while the screen is illuminated, settings are reset.


Item Default Setting Switch Sensitivity Level Mode ECU
Switch Sensitivity Level 02 01 Level 2 (high) 001 Air conditioner panel sub-assembly
02 Level 3
03 Level 4 (low)