87201
1.REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY
Disengage the 4 claws and remove the No. 1 air duct sub-assembly.
87106L
2.REMOVE DAMPER SERVO SUB-ASSEMBLY
Remove the 3 screws and damper servo sub-assembly.
88899N
3.REMOVE COVER PLATE
Disengage the 2 claws and remove the cover plate.
87139D
4.REMOVE AIR REFINER ELEMENT
Remove the air refiner element from the blower unit assembly as shown in the illustration.
87103B
5.REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY
Remove the 3 screws and blower motor with fan sub-assembly.