87103B
1.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY
Install the blower motor with fan sub-assembly with the 3 screws.
87139D
2.INSTALL AIR REFINER ELEMENT
Install the air refiner element to the blower unit assembly as shown in the illustration.
Make sure that the "UP" mark is facing the correct direction before installing the air refiner element.
88899N
3.INSTALL COVER PLATE
Engage the 2 claws to install the cover plate as shown in the illustration.
Make sure that the "UP" mark is facing the correct direction before installing the cover plate.
87106L
4.INSTALL DAMPER SERVO SUB-ASSEMBLY
Install the damper servo sub-assembly with the 3 screws.
87201
5.INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY
Engage the 4 claws to install the No. 1 air duct sub-assembly.