84740B
1.INSPECT ION GENERATOR SWITCH (AIR PURIFIER SWITCH ASSEMBLY)
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 3 (E) - 6 (ECU) | Ion generator switch (air purifier switch assembly) on | Below 1 Ω |
| 3 (E) - 6 (ECU) | Ion generator switch (air purifier switch assembly) off | 10 kΩ or higher |
If the result is not as specified, replace the ion generator switch (air purifier switch assembly).
Check that the switch illuminates.
Apply battery voltage to the ion generator switch (air purifier switch assembly) and check that the switch illuminates.
| Tester Connection | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 5 (ILL+)
Battery negative (-) → Terminal 4 (ILL-) |
Illuminates |
If the result is not as specified, replace the ion generator switch (air purifier switch assembly).
Check switch indicator operation.
Apply battery voltage to the ion generator switch (air purifier switch assembly) and check that the switch indicator illuminates.
| Tester Connection | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 2 (IND+)
Battery negative (-) → Terminal 7 (IND-) |
Indicator Illuminates |
If the result is not as specified, replace the ion generator switch (air purifier switch assembly).