Home › Vehicle Interior › AIR CONDITIONING › REAR EVAPORATOR TEMPERATURE SENSOR
RM24M0E _58 Vehicle Interior _059584 AIR CONDITIONING _0292188 REAR EVAPORATOR TEMPERATURE SENSOR G

AIR CONDITIONING  REAR EVAPORATOR TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 88501R 1.INSPECT EVAPORATOR TEMPERATURE SENSOR

E358372E01
0.656,1.063 0.656,0.719 false 0.458,1.063 0.958,1.333 0.5,0.271 10 false Sensor 3.938,0.042 5.385,0.333 1.448,0.292 10 false Resistance (kΩ) 4.01,0.271 4.51,0.542 0.5,0.271 10 false 10.0 4.083,0.438 4.583,0.708 0.5,0.271 10 false 9.0 4.083,0.615 4.583,0.885 0.5,0.271 10 false 8.0 4.083,0.781 4.583,1.052 0.5,0.271 10 false 7.0 4.073,0.958 4.573,1.229 0.5,0.271 10 false 6.0 4.083,1.135 4.583,1.406 0.5,0.271 10 false 5.0 4.073,1.323 4.573,1.594 0.5,0.271 10 false 4.0 4.083,1.5 4.583,1.771 0.5,0.271 10 false 3.0 4.083,1.667 4.583,1.938 0.5,0.271 10 false 2.0 4.083,1.854 4.583,2.125 0.5,0.271 10 false 1.0 4.083,1.99 4.583,2.26 0.5,0.271 10 false 0.0 4.271,2.115 4.771,2.385 0.5,0.271 10 false -10°C 4.271,2.25 4.771,2.521 0.5,0.271 10 false (14°F) 4.833,2.115 5.333,2.385 0.5,0.271 10 false 0°C 4.76,2.26 5.26,2.531 0.5,0.271 10 false (32°F) 5.354,2.115 5.854,2.385 0.5,0.271 10 false 10°C 5.333,2.25 5.833,2.521 0.5,0.271 10 false (50°F) 5.948,2.115 6.448,2.385 0.5,0.271 10 false 20°C 5.917,2.25 6.417,2.521 0.5,0.271 10 false (68°F) 6.521,2.115 7.021,2.385 0.5,0.271 10 false 30°C 6.479,2.25 6.979,2.521 0.5,0.271 10 false (86°F) 5.198,2.417 6.271,2.635 1.073,0.219 10 false Temperature

a.

Measure the resistance of the sensor.

Standard resistance:
Tester Connection Condition Specified Condition
6 - 5 -10°C (14°F) 7.30 to 9.10 kΩ
6 - 5 -5°C (23°F) 5.65 to 6.95 kΩ
6 - 5 0°C (32°F) 4.40 to 5.35 kΩ
6 - 5 5°C (41°F) 3.40 to 4.15 kΩ
6 - 5 10°C (50°F) 2.70 to 3.25 kΩ
6 - 5 15°C (59°F) 2.14 to 2.58 kΩ
6 - 5 20°C (68°F) 1.71 to 2.05 kΩ
6 - 5 25°C (77°F) 1.38 to 1.64 kΩ
6 - 5 30°C (86°F) 1.11 to 1.32 kΩ


NOTICE:
·

Even slightly touching the sensor may change the resistance value. Be sure to hold the connector of the sensor.

·

When measuring the sensor temperature must be the same as the ambient temperature.



HINT:

As the temperature increases, the resistance decreases (see the graph).


If the resistance value is not as specified, replace the sensor.