84330
1.REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY
33554H
2.REMOVE SHIFT LOCK RELEASE BUTTON COVER
Using a screwdriver, disengage the 2 claws and remove the shift lock release button cover as shown in the illustration.
| *a | Protective Tape |
Tape the screwdriver tip before use.
55403F
3.REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
Remove the 4 screws.
Disengage the 2 claws and remove the instrument panel finish panel sub-assembly.
55416C
4.REMOVE INSTRUMENT CLUSTER FINISH PANEL RETAINER
Remove the 5 screws.
Disengage the 2 claws and guide, and remove the instrument cluster finish panel retainer.
82143
5.REMOVE NO. 3 INSTRUMENT PANEL WIRE
Disengage the 5 clamps and remove the No. 3 instrument panel wire.