THEFT DETERRENT SYSTEM DESCRIPTION
The theft deterrent system is designed to deter vehicle break-ins and theft. If an attempted break-in or theft is detected, the vehicle horns and security horn will sound and the hazard warning light will flash. The system detects an attempted break-in or theft when any of the following occurs: 1) the vehicle is forcibly entered, 2) the engine hood is forcibly opened, 3) the doors are unlocked without the use of a key, or 4) the cable is disconnected and reconnected from the negative (-) battery terminal.
If the system enters the alarm sounding state, any unlocked doors will automatically lock.
The system has 4 states: disarmed state, arming preparation state, armed and alarm sounding state.
FUNCTION OF MAIN COMPONENT
| Function | Outline |
|---|---|
| Security indicator | Informs driver of theft deterrent system status |
| Security horn | Sounds when attempted brake-in or theft is detected |
| Taillight | Taillight illuminates if system enters alarm sounding state when system is unset |
| Hazard warning light | Hazard warning light begins flashing when attempted break-in or theft is detected |
| Vehicle horns | Sounds when attempted break-in or theft is detected |
| Door courtesy light switch | Detects door open status (open or closed) |
| Door lock position switch | Detects door lock status (locked or unlocked) |
| Engine hood courtesy switch | Detects engine hood open status (open or closed) |
| Back door courtesy switch | Detects back door open status (open or closed) |
| Power source control ECU | Detects ignition switch (off or on (IG)) |
SYSTEM FUNCTION
Disarmed state:
The alarm function is not operating.
The theft deterrent system is not operating.
Arming preparation state:
The theft deterrent system is not operating.
Arming state:
The theft deterrent system is operating.
Alarm sounding state:
The alarm function is operating (30 +-5 seconds).