Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › from 2016.05
RM24M0E _58 Vehicle Interior _059587 METER / GAUGE / DISPLAY _0292197 METER / GAUGE SYSTEM D

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  SYSTEM DESCRIPTION  


METER GAUGE AND WARNING / INDICATOR


Gauge:
Item Detail
Speedometer Indicates the vehicle speed based on a signal received from the brake actuator assembly (skid control ECU).
Tachometer Indicates the engine speed based on a signal received from the ECM.
Engine coolant temperature gauge*1 Indicates the engine coolant temperature based on a signal received from the ECM.
Fuel receiver gauge Indicates the fuel level based on a signal received from the fuel sender gauge assembly.

HINT:

*1: w/o Multi-information Display


Warning / Indicator:
Item Detail
Turn indicator light
·

Receives a turn signal from the headlight dimmer switch assembly*1.

·

Receives a turn signal from the flasher relay*2.


High beam indicator light Receives a high beam signal from the main body ECU (instrument panel junction block LH).
Front fog indicator light*12 Receives a front fog light signal from the main body ECU (instrument panel junction block LH).
Rear fog indicator light*11 Receives a rear fog light signal from the main body ECU (instrument panel junction block LH).
Charge warning light*2 Receives a charge signal from the ECM and generator assembly.
MIL (Check engine warning light) Receives a MIL (check engine warning light) signal from the ECM.
Open door warning light*2 Receives a door courtesy switch signal from the main body ECU (instrument panel junction block LH).
Driver seat belt warning light*2 Receives a driver seat belt buckle switch signal from the main body ECU (instrument panel junction block LH).
Front passenger seat belt warning light*2, *13 Receives a front passenger seat belt buckle switch signal from the front seat inner belt assembly and a front passenger seat occupant detection sensor signal from the occupant detection sensor (separate type front seat cushion pad).
Driver or front passenger seat belt warning light*1
·

Receives a driver seat belt buckle switch signal from the main body ECU (instrument panel junction block LH).

·

Receives a front passenger seat belt buckle switch signal from the front seat inner belt assembly and a front passenger seat occupant detection sensor signal from the occupant detection sensor (separate type front seat cushion pad).


Brake warning light
·

Receives a parking brake switch signal from the main body ECU (instrument panel junction block LH).

·

Receives a brake fluid level warning signal from the brake fluid level warning switch.

·

Receives a brake warning light signal from the brake actuator (skid control ECU).


Cruise control indicator light*2, *8 Receives a cruise main indicator signal from the ECM.
SRS warning light Receives an SRS warning light control request signal from the center airbag sensor assembly.
Slip indicator light Receives a slip indicator signal from the brake actuator assembly (skid control ECU).
ABS warning light Receives an ABS warning light control signal from the brake actuator assembly (skid control ECU).
Tail indicator light Receives a taillight request signal from the main body ECU (instrument panel junction block LH).
EPS warning light Receives an EPS warning light signal from the power steering ECU assembly.
Engine oil pressure warning light*2 Receives an engine oil pressure signal from the engine oil pressure switch assembly.
Fuel level warning light Receives a remaining fuel signal from the fuel sender gauge assembly.
AFS OFF indicator light*3 Receives an AFS OFF signal from the headlight swivel ECU assembly.
Security indicator light Receives a security indicator signal from the certification ECU (smart key ECU assembly).
Key warning light*2 Receives a key indicator signal from the certification ECU (smart key ECU assembly).
3rd seat indicator light*2, *4 Receives a fold seat signal from the fold seat control ECU.
120 km/h warning light*5 Receives a vehicle speed signal from the brake actuator assembly (skid control ECU).
S mode indicator light*2, *6 Receives a shift mode signal from the ECM.
M mode indicator light*2, *7 Receives a shift mode signal from the ECM.
VSC OFF indicator light Receives a VSC OFF signal from the brake actuator assembly (skid control ECU).
TRC OFF indicator light*2 Receives a TRC OFF signal from the brake actuator assembly (skid control ECU).
Master warning light*1 Receives a multi-information display warning signal from the related ECUs.
Clearance sonar indicator light*1, *9 Receives a clearance sonar main switch signal from the clearance warning ECU assembly.
Tire pressure warning light*10 Receives a tire pressure warning signal from the tire pressure warning ECU and receiver.

HINT:

*1: w/ Multi-information Display

*2: w/o Multi-information Display

*3: w/ AFS

*4: w/ Rear Power Seat

*5: w/ Speed Warning

*6: for Automatic Transaxle

*7: for CVT

*8: w/ Cruise Control System

*9: w/ TOYOTA Parking Assist-sensor System

*10: w/ Tire Pressure Warning System

*11: w/ Rear Fog Light

*12: w/ Front Fog Light

*13: w/ Front Passenger Seat Belt Warning


Buzzer:
Item Detail
Seat belt warning buzzer (for Driver side) Receives a driver seat belt buckle switch signal from the main body ECU (instrument panel junction block LH) and a vehicle speed signal from the brake actuator assembly (skid control ECU).
Seat belt warning buzzer (for Front passenger side)*4
·

Receives a front passenger seat belt buckle switch signal from the front seat inner belt assembly and a front passenger seat occupant detection sensor signal from the occupant detection sensor (separate type front seat cushion pad).

·

Receives a vehicle speed signal from the brake actuator assembly (skid control ECU).


Smart key warning buzzer Receives a meter buzzer request signal from the certification ECU (smart key ECU assembly).
Light reminder buzzer Receives a taillight request signal and driver door courtesy switch signal from the main body ECU (instrument panel junction block LH).
Reverse buzzer*3 Receives a shift position R signal from the ECM.
Shift reject buzzer Receives a reject buzzer signal from the ECM.
Speed warning buzzer*1 Receives a vehicle speed signal from the brake actuator assembly (skid control ECU).
Driving with parking brake unreleased warning buzzer Receives a vehicle speed signal from the brake actuator assembly (skid control ECU) and a parking brake switch signal from the main body ECU (instrument panel junction block LH).
Key reminder buzzer Receives a key switch signal and driver door courtesy switch signal from the main body ECU (instrument panel junction block LH).
EPS warning buzzer Receives an EPS warning signal from the power steering ECU assembly.
Vehicle roll-away warning buzzer
·

Receives an engine speed signal and shift position signal from the ECM.

·

Receives a vehicle speed signal from the brake actuator assembly (skid control ECU).


Multi-information display warning buzzer*2 Receives a multi-information display warning signal from the related ECUs.
Immobiliser key identification completion buzzer*2 Receives an immobiliser key identification completion signal from the certification ECU (smart key ECU assembly).
Driving with door open warning buzzer*2
·

Receives each door courtesy switch signal and hood courtesy switch signal from the main body ECU (instrument panel junction block LH)*5.

·

Receives each door courtesy switch signal from the main body ECU (instrument panel junction block LH)*6.

·

Receives a vehicle speed signal from the brake actuator assembly (skid control ECU).


Engine oil pressure warning buzzer*2 Receives an engine oil pressure signal from the engine oil pressure switch assembly.

HINT:

*1: w/ Speed Warning

*2: w/ Multi-information Display

*3: w/ Reverse Buzzer

*4: w/ Front Passenger Seat Belt Warning

*5: w/ Theft Deterrent System

*6: w/o Theft Deterrent System


a.

Multi-information Display (w/ Multi-information Display)

Item Detail
Shift position The current shift position is displayed.
Cruise control indicator light When the display conditions are met, the cruise control indicator light is displayed.
Ambient temperature The current ambient temperature is displayed.
Odometer Displays the odometer, TRIP A meter or TRIP B meter.
TRIP meter
Light control rheostat Displayed when the meter panel luminance is adjusted by using the TRIP switch (steering pad switch assembly).
Information The following information can be displayed on the multi-information display by switching between tabs.
·

Drive information

·

Eco information

·

Message

·

Settings


Each system warning Interrupts the multi-information display immediately when a warning occurs.



MULTI-INFORMATION DISPLAY FLOW CHART


a.

Multi-information display flow chart

E342270E02
4.542,0.625 4.854,0.813 0.313,0.188 10 false OFF 2.344,1.719 4.906,1.906 2.563,0.188 10 false Engine Switch off or on (ACC) to on (IG) 2.698,7.135 4.51,7.323 1.813,0.188 10 false Engine Switch on (IG) to off 3.104,2.417 4.167,2.604 1.063,0.188 10 false Opening Display 2.573,7.74 4.792,7.927 2.219,0.188 10 false Trip Summary (Ending) Display*e 0.396,4.625 1.563,4.813 1.167,0.188 10 false Interrupt Display 3.458,8.333 3.75,8.521 0.292,0.188 10 false OFF 3.073,3.531 4.125,3.719 1.052,0.188 10 false Drive Monitor*d 2.729,4.063 4.375,4.25 1.646,0.188 10 false 1. Drive Information Tab 2.729,4.552 4.01,4.74 1.281,0.188 10 false 2. Eco Tab 2.729,5.042 4.583,5.229 1.854,0.188 10 false 3. Message Tab 2.729,5.51 3.708,5.698 0.979,0.188 10 false 4. Setting Tab 2.344,0.625 3.531,0.813 1.188,0.188 10 false Warning Display*c 5.573,4.625 6.76,4.813 1.188,0.188 10 false Warning Display*c 4.021,0.719 4.208,0.906 0.188,0.188 10 false *a 3.927,0.406 4.115,0.594 0.188,0.188 10 false *b 5.208,4.365 5.396,4.552 0.188,0.188 10 false *b 5.125,4.844 5.313,5.031 0.188,0.188 10 false *a 1.552,8.26 1.74,8.448 0.188,0.188 10 false *b 2.177,7.667 2.365,7.854 0.188,0.188 10 false *a 1.927,4.833 2.115,5.021 0.188,0.188 10 false *a 1.865,4.375 2.052,4.563 0.188,0.188 10 false *b 0.542,7.719 1.729,7.906 1.188,0.188 10 false Warning Display*c

Display Change Condition:
Item Display Change Condition
*a Conditions are met.
*b Conditions are not met.
*c If there are multiple display requests, items will be displayed in sequence.
*d Item or display is selected by operating the steering pad switch.
*e Odometer display is displayed for a certain period of time after the engine switch is turned off.