This circuit is from the parking brake switch assembly to the navigation receiver assembly.
Check that the brake warning light comes on when the parking brake is applied and goes off when it is released.
The brake warning light operates as specified above.
OK
NG
Disconnect the F18 navigation receiver assembly connector.
Disconnect the A4 parking brake switch assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| F18-6 (PKB) - A4-1 | Always | Below 1 Ω |
| F18-6 (PKB) - Body ground | Always | 10 kΩ or higher |
OK
(See pageAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>PROBLEM SYMPTOMS TABLE)
NG