These DTCs are stored when a malfunction occurs in the navigation antenna assembly.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15C0 | Navigation antenna error | ·
Navigation antenna cord ·
Navigation antenna assembly ·
Navigation receiver assembly |
| B15C1 | Error of the power source to the navigation antenna |
When replacing the navigation receiver assembly, perform vehicle contract setting (See page Audio / Visual / Telematics>G-BOOK>G-BOOK SYSTEM>REGISTRATION).
Check if the navigation antenna cord is securely connected to the navigation receiver assembly.
Navigation antenna cord is securely connected.
OK
NG
Replace the navigation antenna assembly with a known good one and check if the same DTC is output again (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION ANTENNA>REMOVAL).
Clear the DTCs (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).
Recheck for DTCs and check that no DTCs are output.
No DTCs are output.
OK
NG