1.REMOVE REAR BUMPER ASSEMBLY
89348D
2.REMOVE ULTRASONIC SENSOR CLIP (for Corner Sensor)
Use the same procedure for the RH side and LH side.
Disconnect the connector.
Disengage the clamp.
Disengage the 2 claws to remove the ultrasonic sensor clip.
89342
3.REMOVE REAR CORNER ULTRASONIC SENSOR
Use the same procedure for the RH side and LH side.
Disengage the 4 claws and remove the rear corner ultrasonic sensor as shown in the illustration.
89342A
4.REMOVE REAR CENTER ULTRASONIC SENSOR
Use the same procedure for the RH side and LH side.
Disconnect the connector.
Disengage the 4 claws and remove the rear center ultrasonic sensor as shown in the illustration.