These DTCs are stored when the clearance warning ECU assembly cannot receive and recognize several signals via the CAN communication line.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| U0101 | Lost communication with the ECM | CAN communication system |
| U0155 | Lost communication with the combination meter assembly |
When 2 or more DTCs starting with "U" are output simultaneously, inspect the connectors and wire harnesses of each ECU.
Check for CAN communication system DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM(for RHD)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| CAN communication system DTCs are output | A |
| No CAN communication system DTCs are output | B |
A
B
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)