Home › Vehicle Interior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM › 2014.09–2016.05
RM24M0E _58 Vehicle Interior _059592 WINDOW / GLASS _0292216 POWER WINDOW CONTROL SYSTEM D

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM  SYSTEM DESCRIPTION  


POWER WINDOW CONTROL SYSTEM DESCRIPTION


a.

The power window control system controls the power window UP / DOWN function using the regulator motors. The main controls of this system are: the multiplex network master switch, which is built into the driver side door, and the power window regulator switches, which are built into the passenger side door and rear doors.

Pressing the regulator switch or either of the switches on the master switch transmits an UP / DOWN signal via LIN communication to the corresponding power window regulator motor.

An ECU is built into the power window regulator motor.



FUNCTION OF MAIN COMPONENT


a.

The power window control system consists of the following components:

Component Outline
Multiplex Network Master Switch
·

Controls power window operation for all windows

·

When window lock switch is set to lock position, window operation will only be possible with driver's master switch


Power Window Regulator Switch
·

Located on passenger side door and rear doors

·

Each regulator switch controls window operations for its respective window


Power Window Regulator Motor
·

Receives switch signals and changes signals into motor activation to change window position

·

Uses 2 Hall-ICs in regulator motor with ECU to detect window position and jamming





SYSTEM FUNCTION


a.

The power window control system has the following functions:

Function Outline
Manual UP / DOWN function Function that raises window while switch is pulled halfway up, and lowers window while pushed halfway down (window stops as soon as switch is released)
AUTO UP / DOWN function
(ALL AUTO)
Function that enables window to be fully opened or closed by one full push or pull of switch
Remote UP / DOWN function Function that allows master switch to control front passenger side power window and rear power windows
Key-off operation function
·

Function that makes it possible to operate all power windows for approximately 45 seconds after engine switch is turned on (ACC) or off when driver side door or front passenger side door has not been opened

·

When AUTO function is operating, window operation will continue until complete even if 45 seconds have passed or a door is opened


Window lock function
·

Function where front passenger side power window and rear power window operation is disabled when window lock switch of master switch is pressed

·

Front passenger side power window and rear power windows can be operated when window lock switch is pressed again


Jam protection function
·

Function that automatically stops power window and moves it downward if object is jammed in power window

·

Jam protection function works for AUTO UP and manual UP operation


Diagnosis
·

Function where power window regulator motor detects malfunctions in power window system and makes diagnosis

·

Power window regulator switch light blinks to inform driver of malfunction*


Fail-safe If pulse sensor(s) (Hall IC(s)) in power window regulator motor malfunctions, power window AUTO UP and DOWN function is disabled, but remote control function is active as long as ECU built into power window regulator motor operates normally

*: for LHD