CHECK DTC
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the tester ON.
Select the following menu items: Body / Master Switch / DTC.
Select the following menu items: Body / D-Door Motor / DTC.
Select the following menu items: Body / P-Door Motor / DTC.
Select the following menu items: Body / RL-Door Motor / DTC.
Select the following menu items: Body / RR-Door Motor / DTC.
Select the following menu items: Body / Body ECU / DTC.
Check the DTC(s).
CLEAR DTC
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the tester ON.
Select the following menu items: Body / Master Switch / DTC / Clear.
Select the following menu items: Body / D-Door Motor / DTC / Clear.
Select the following menu items: Body / P-Door Motor / DTC / Clear.
Select the following menu items: Body / RL-Door Motor / DTC / Clear.
Select the following menu items: Body / RR-Door Motor / DTC / Clear.
Select the following menu items: Body / Body ECU / DTC / Clear.
Press the YES button.
Check that "DTCs are cleared" is displayed.
If any DTCs are output, troubleshoot those DTCs again.