Home › Vehicle Interior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM › 2013.04–2016.05
RM24M0E _58 Vehicle Interior _059592 WINDOW / GLASS _0292216 POWER WINDOW CONTROL SYSTEM U

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM  FAIL-SAFE CHART  


POWER WINDOW OPERATION IN FAIL-SAFE MODE


HINT:

If the pulse sensor built into the power window regulator motor malfunctions, the power window control system enters fail-safe mode.


a.

The power window control system prohibits the following power window operation when the pulse sensor for the jam protection function has problems and the window position or the learned value is abnormal.

Power window control system
Power window operation Ignition switch on (IG) Key-off
(Within approx. 45 seconds after ignition switch turned off)
Key-off
(After approx. 45 seconds elapsed after ignition switch turned off)
Manual UP Operation prohibited Operation prohibited Operation prohibited
Manual DOWN Operative
(Jam protection not operative)
Operation prohibited Operation prohibited
AUTO UP
(hold switch at AUTO UP position)
Operative
(in MANUAL mode)
(Jam protection not operative)
Operation prohibited Operation prohibited
AUTO UP Operation prohibited Operation prohibited Operation prohibited
AUTO DOWN Operation prohibited Operation prohibited Operation prohibited

HINT:

When the pulse sensor is normal, the AUTO UP / DOWN function can be resumed by deactivating fail-safe mode. To deactivate fail-safe mode, pull up the power window switch to the AUTO UP position and hold it for at least 1 second to fully close the window from the fully open position.



b.

If the LIN communication line malfunctions (communication blackout), the power window control system prohibits the following operations.

Remote UP / DOWN function does not operate.

Multiplex network master switch
Power window operation Ignition switch on (IG)
MANUAL UP Operative (Jam protection operative)
MANUAL DOWN Operative (Jam protection not operative)

Power window regulator switch (for front passenger side, rear LH and rear RH)
Power window operation Ignition switch on (IG)
MANUAL UP Operative (Jam protection operative)
MANUAL DOWN Operative (Jam protection not operative)
AUTO UP (hold switch at AUTO UP position) Operative (Jam protection operative)
AUTO UP Operative (Jam protection operative)
AUTO DOWN Operative (Jam protection not operative)