84810
1.INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY
Measure the resistance of the switch when the switch is operated.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 6 (UP) - 1 (GND) | Manual UP operation | Below 1 Ω |
| 7 (DOWN) - 1 (GND) | Manual DOWN operation | Below 1 Ω |
| 8 (AUTO) - 1 (GND) | AUTO UP / DOWN operation | Below 1 Ω |
If the result is not as specified, replace the switch assembly.
Check that the LED illuminates.
Apply battery voltage to the master switch and check that the LED illuminates.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4 (LED)
Battery negative (-) → Terminal 1 (GND) |
LED illuminates |
If the result is not as specified, replace the switch assembly.