Home › Vehicle Interior › WINDOW / GLASS › REAR POWER WINDOW SWITCH
RM24M0E _58 Vehicle Interior _059592 WINDOW / GLASS _0292219 REAR POWER WINDOW SWITCH G

WINDOW / GLASS  REAR POWER WINDOW SWITCH  INSPECTION  


PROCEDURE

Hide 84810D 1.INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY

a.
B129574E04
2.492,1.078 2.842,1.234 0.350,0.156 10 GND 2.19,1.892 2.409,2.048 0.218,0.156 10 UP 0.979,1.892 1.482,2.048 0.503,0.156 10 DOWN 0.458,1.293 0.898,1.449 0.441,0.156 10 AUTO 2.061,1.157 2.448,1.157 false 1.001,1.386 1.387,1.386 false 1.617,1.446 1.269,1.86 false 1.846,1.446 2.195,1.86 false

Measure the resistance of the switch when the switch is operated.

Standard resistance:
Tester Connection Switch Condition Specified Condition
6 (UP) - 1 (GND) Manual UP operation Below 1 Ω
7 (DOWN) - 1 (GND) Manual DOWN operation Below 1 Ω
8 (AUTO) - 1 (GND) AUTO UP / DOWN operation Below 1 Ω


If the result is not as specified, replace the switch assembly.



b.
B145464E01
2.002,0.318 2.304,0.466 0.302,0.148 10 LED 1.385,0.796 1.659,0.389 1.659,0.389 1.964,0.389 false 0.419,3.313 0.721,3.461 0.302,0.148 10 LED 0.772,3.413 1.362,3.413 false 2.703,3.313 3.063,3.461 0.360,0.148 10 GND 2.088,3.413 2.678,3.413 false

Check that the LED illuminates.


c.

Apply battery voltage to the master switch and check that the LED illuminates.

OK
Measurement Condition Specified Condition
Battery positive (+) → Terminal 4 (LED)
Battery negative (-) → Terminal 1 (GND)
LED illuminates

If the result is not as specified, replace the switch assembly.