Home › Vehicle Interior › WINDOW / GLASS › WINDOW DEFOGGER WIRE
RM24M0E _58 Vehicle Interior _059592 WINDOW / GLASS _0292226 WINDOW DEFOGGER WIRE A

WINDOW / GLASS  WINDOW DEFOGGER WIRE  REPAIR  


PROCEDURE

Hide 68131 1.REPAIR DEFOGGER WIRE

U130082E08
2.771,1.125 2.771,1.417 false 1.052,0.885 0.656,0.885 0.656,0.885 0.656,1.573 false 1.042,1.292 0.656,1.292 false 1.719,0.969 1.719,0.292 1.719,0.292 2.052,0.292 false 2.083,0.208 3,0.385 0.917,0.177 10 false Repair Point 0.104,1.615 1.125,1.865 1.021,0.25 10 false Masking Tape 2.583,1.427 3.156,1.906 0.573,0.479 10 false Broken Wire

a.

Clean the broken wire tips with grease, wax and silicone remover.


b.

Place masking tape along both sides of the wire.


c.

Thoroughly mix the repair agent.

Dupont paste:

No. 4817 or equivalent



d.
U130083E08
1.365,0.354 1.75,0.354 false 1.438,0.958 0.521,0.958 0.521,0.958 0.521,1.396 false 0.427,0.271 1.583,0.469 1.156,0.198 10 false Fine Tip Brush 0.073,1.427 1.073,1.625 1,0.198 10 false Repair Point

Using a fine tip brush, apply a small amount of the agent to the wire.


e.

After a few minutes, remove the masking tape.

NOTICE:

Do not repair the defogger wire again for at least 24 hours.