Home › Vehicle Interior › MIRROR › OUTER MIRROR SWITCH › 2013.04–2016.05
RM24M0E _58 Vehicle Interior _059593 MIRROR _0292231 OUTER MIRROR SWITCH G

MIRROR  OUTER MIRROR SWITCH  INSPECTION  


PROCEDURE

Hide 84870A 1.INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror)

B144524E01
1.018,0.267 1.426,0.440 0.409,0.173 10 LEFT 2.01,0.28 2.527,0.442 0.517,0.163 10 RIGHT 0.115,0.572 0.931,1.255 0.816,0.684 10 Left/Right Adjustment Switch 2.416,1.826 2.933,2.218 0.517,0.392 10 Mirror Switch 2.519,0.681 3.036,1.073 0.517,0.392 10 Retract Switch 2.198,0.881 2.473,0.881 false 1.038,0.873 1.313,0.873 false 1.63,2.101 1.880,2.299 0.250,0.198 10 UP 0.863,2.651 1.248,2.809 0.385,0.158 10 LEFT 2.186,2.651 2.659,2.805 0.473,0.153 10 RIGHT 1.459,3.075 1.926,3.241 0.467,0.165 10 DOWN 1.181,4.099 1.331,4.239 0.150,0.140 10 E 2.348,4.091 2.588,4.249 0.240,0.158 10 VR 2.709,3.956 2.940,4.113 0.231,0.157 10 HR 2.017,4.115 2.210,4.274 0.192,0.159 10 VL 1.741,4.118 1.956,4.271 0.215,0.153 10 HL 1.421,4.124 1.669,4.270 0.248,0.147 10 M+ 0.888,4.06 1.015,4.239 0.127,0.179 10 B 0.613,3.436 0.837,3.615 0.224,0.179 10 MF 0.851,3.108 1.098,3.287 0.247,0.179 10 MR 1.58,3.833 1.003,4.07 false 1.325,4.108 1.676,3.843 false 1.791,3.837 1.57,4.115 false 1.912,3.834 1.844,4.111 false 2.017,3.835 2.085,4.108 false 2.14,3.832 2.362,4.08 false 2.25,3.839 2.673,4.004 false 2.085,1.716 2.372,2.008 false 1.462,3.757 1.161,3.219 false 1.342,3.758 0.887,3.528 false

a.

The L position of the left/right adjustment switch: Measure the resistance of the mirror switch.

Standard resistance (for left side):
Tester Connection Switch Condition Specified Condition
9 (VL) - 13 (B)
11 (M+) - 12 (E)
UP Below 1 Ω
OFF 10 kΩ or higher
9 (VL) - 12 (E)
11 (M+) - 13 (B)
DOWN Below 1 Ω
OFF 10 kΩ or higher
10 (HL) - 13 (B)
11 (M+) - 12 (E)
LEFT Below 1 Ω
OFF 10 kΩ or higher
10 (HL) - 12 (E)
11 (M+) - 13 (B)
RIGHT Below 1 Ω
OFF 10 kΩ or higher


If the result is not as specified, replace the switch assembly.


b.

The R position of the left/right adjustment switch: Measure the resistance of the mirror switch.

Standard resistance (for right side):
Tester Connection Switch Condition Specified Condition
8 (VR) - 13 (B)
11 (M+) - 12 (E)
UP Below 1 Ω
OFF 10 kΩ or higher
8 (VR) - 12 (E)
11 (M+) - 13 (B)
DOWN Below 1 Ω
OFF 10 kΩ or higher
7 (HR) - 13 (B)
11 (M+) - 12 (E)
LEFT Below 1 Ω
OFF 10 kΩ or higher
7 (HR) - 12 (E)
11 (M+) - 13 (B)
RIGHT Below 1 Ω
OFF 10 kΩ or higher


If the result is not as specified, replace the switch assembly.


c.

Measure the resistance of the retract switch.

OK:
Tester Connection Switch Condition Specified Condition
13 (MF) - 13 (B)
12 (MR) - 12 (E)
RETURN Below 1 Ω
13 (MF) - 12 (E)
12 (MR) - 13 (B)
RETRACT Below 1 Ω


If the result is not as specified, replace the switch.


Hide 84870A 2.INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror)

B144548E01
1.026,0.267 1.435,0.440 0.409,0.173 10 LEFT 2.019,0.28 2.536,0.442 0.517,0.163 10 RIGHT 0.124,0.572 0.940,1.255 0.816,0.684 10 Left/Right Adjustment Switch 2.424,1.826 2.941,2.218 0.517,0.392 10 Mirror Switch 1.046,0.873 1.452,0.873 false 1.638,2.101 1.888,2.299 0.250,0.198 10 UP 0.872,2.651 1.256,2.809 0.385,0.158 10 LEFT 2.195,2.651 2.668,2.805 0.473,0.153 10 RIGHT 1.467,3.075 1.935,3.241 0.467,0.165 10 DOWN 1.19,4.099 1.339,4.239 0.150,0.140 10 E 2.356,4.091 2.597,4.249 0.240,0.158 10 VR 2.718,3.956 2.948,4.113 0.231,0.157 10 HR 2.026,4.115 2.218,4.274 0.192,0.159 10 VL 1.75,4.118 1.965,4.271 0.215,0.153 10 HL 1.43,4.124 1.678,4.270 0.248,0.147 10 M+ 0.897,4.06 1.024,4.239 0.127,0.179 10 B 1.589,3.833 1.011,4.07 false 1.333,4.108 1.684,3.843 false 1.8,3.837 1.578,4.115 false 1.92,3.834 1.852,4.111 false 2.026,3.835 2.094,4.108 false 2.149,3.832 2.371,4.08 false 2.259,3.839 2.682,4.004 false 2.094,1.699 2.38,1.991 false

a.

The L position of the left/right adjustment switch: Measure the resistance of the mirror switch.

Standard resistance (for left side):
Tester Connection Switch Condition Specified Condition
9 (VL) - 13 (B)
11 (M+) - 12 (E)
UP Below 1 Ω
OFF 10 kΩ or higher
9 (VL) - 12 (E)
11 (M+) - 13 (B)
DOWN Below 1 Ω
OFF 10 kΩ or higher
10 (HL) - 13 (B)
11 (M+) - 12 (E)
LEFT Below 1 Ω
OFF 10 kΩ or higher
10 (HL) - 12 (E)
11 (M+) - 13 (B)
RIGHT Below 1 Ω
OFF 10 kΩ or higher


If the result is not as specified, replace the switch assembly.


b.

The R position of the left/right adjustment switch: Measure the resistance of the mirror switch.

Standard resistance (for right side):
Tester Connection Switch Condition Specified Condition
8 (VR) - 13 (B)
11 (M+) - 12 (E)
UP Below 1 Ω
OFF 10 kΩ or higher
8 (VR) - 12 (E)
11 (M+) - 13 (B)
DOWN Below 1 Ω
OFF 10 kΩ or higher
7 (HR) - 13 (B)
11 (M+) - 12 (E)
LEFT Below 1 Ω
OFF 10 kΩ or higher
7 (HR) - 12 (E)
11 (M+) - 13 (B)
RIGHT Below 1 Ω
OFF 10 kΩ or higher


If the result is not as specified, replace the switch assembly.