Home › Vehicle Interior › EXTERIOR › ROOF DRIP SIDE FINISH MOULDING
RM24M0E _58 Vehicle Interior _059595 EXTERIOR _0292240 ROOF DRIP SIDE FINISH MOULDING A

EXTERIOR  ROOF DRIP SIDE FINISH MOULDING  REMOVAL  


PROCEDURE

Hide 75552E 1.REMOVE ROOF DRIP SIDE FINISH MOULDING

B141121E02
2.635,1.115 2.635,1.354 false 2.094,1.396 3.115,1.594 1.021,0.198 10 true Protective Tape

a.

Put protective tape around the roof drip side finish moulding.


b.

Using a for moulding remover, detach the clips both in the front and rear ends of the roof drip side finish moulding and then remove the roof drip side finish moulding.

NOTICE:
·

Do not remove the clips.

·

If the clips are damaged or removed accidentally, exchange them for the supplied ones.