Home › Vehicle Interior › EXTERIOR › REAR DOOR WINDOW FRAME MOULDING
RM24M0E _58 Vehicle Interior _059595 EXTERIOR _0292242 REAR DOOR WINDOW FRAME MOULDING A

EXTERIOR  REAR DOOR WINDOW FRAME MOULDING  INSTALLATION  


PROCEDURE

Hide 75766A 1.INSTALL REAR DOOR WINDOW REAR FRAME MOULDING

a.

Remove the tape from the frame moulding.


b.

Clean the contact surface of the vehicle body with non-residue solvent.


c.

Clean the outer circumference of the frame moulding with non-residue solvent.


d.
B141128E02
1.797,1.382 2.931,1.584 1.133,0.202 10 Double-side Tape 2.256,1.882 2.443,2.052 0.187,0.170 10 A 1.996,2.559 2.183,2.728 0.187,0.170 10 B 2.92,2.554 3.108,2.724 0.187,0.170 10 C 2.163,3.169 2.661,3.352 0.498,0.183 10 Tape 1 1.185,0.015 1.683,0.198 0.498,0.183 10 Tape 2 1.64,0.609 2.780,0.799 1.139,0.191 10 Caulking Sponge 2.061,3.917 3.159,4.107 1.098,0.191 10 Caulking Sponge 0.756,0.97 1.578,0.697 false 0.895,4.193 0.895,4.013 false 0.895,4.013 2.03,4.013 false 1.306,4.165 1.306,4.019 false 2.124,3.255 1.663,3.255 false 0.733,0.286 0.733,0.11 false 0.733,0.11 1.144,0.11 false

Apply new double-sided tape to the frame moulding, as shown in the illustration.

Dimensions:
Area Specified Condition
A Tape 1: 440.0 mm (17.323 in.)
Tape 2: 40.0 mm (1.575 in.)
B Tape 1: 7.0 mm (0.276 in.)
Tape 2: 10 mm (.0.394 in.)
C 0.8 mm (0.031 in.)



e.

Using a heat light, heat the vehicle body and frame moulding.

Heating temperature:
Item Specified Condition
Body 40 to 60°C (104 to 140°F)
Moulding 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the body and frame moulding excessively.



f.

Remove the peeling paper from the face of the rear door window rear frame moulding face.

HINT:

Be careful that dirt or foreign objects do not stick to the adhesive part when removing the peeling paper.



g.

Engage the 2 claws and install the frame moulding with the screw.

NOTICE:

Do not apply excessive force onto the frame moulding. Apply steady pressure with your thumbs.