67939D
1.REMOVE BACK DOOR CENTER GARNISH
67848
2.REMOVE BACK DOOR SERVICE HOLE COVER LH (w/ Power Back Door)
62581H
3.REMOVE REAR WINDOW SIDE GARNISH RH
62582H
4.REMOVE REAR WINDOW SIDE GARNISH LH
Use the same procedure as for the RH side.
67750
5.REMOVE BACK DOOR TRIM BOARD ASSEMBLY
76802C
6.REMOVE NO. 2 BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
Disconnect the license light connector.
Remove the 4 nuts.
Disengage the 2 clips and remove the No. 2 back door outside garnish sub-assembly.
Remove the back door outside opener switch.