Home › Vehicle Interior › EXTERIOR › FRONT BUMPER(for Sport Package) › from 2016.05
RM24M0E _58 Vehicle Interior _059595 EXTERIOR _0292247 FRONT BUMPER(for Sport Package) A

EXTERIOR  FRONT BUMPER(for Sport Package)  DISASSEMBLY  


PROCEDURE

Hide 53879A 1.REMOVE FRONT FENDER LINER RETAINER

a.
B448510

Disengage the 2 claws to remove the 2 front fender liner retainers.

HINT:

Use the same procedure for the RH side and LH side.



Hide 53155G 2.REMOVE RADIATOR GRILLE SEAL

a.
B448526E02
1.813,1 2.146,0.885 true 2.198,0.74 2.49,0.99 0.292,0.25 10 false *a

Separate the double-sided tape to remove the radiator grille seal.

Text in Illustration
*a Double-sided Tape

HINT:

Use the same procedure for the RH side and LH side.



Hide 8122A 3.REMOVE LED ILLUMINATION LIGHT LH

Hide 8121A 4.REMOVE LED ILLUMINATION LIGHT RH

HINT:

Use the same procedure as for the LH side.


Hide 52113D 5.REMOVE FRONT BUMPER EXTENSION LH

a.
B448513

Disengage the 2 claws to remove the front bumper extension LH.


Hide 52112D 6.REMOVE FRONT BUMPER EXTENSION RH

HINT:

Use the same procedure as for the LH side.


Hide 89341K 7.REMOVE FRONT CORNER ULTRASONIC SENSOR (w/ Clearance Sonar System)

Hide 82114 8.REMOVE NO. 4 ENGINE ROOM WIRE (w/o Clearance Sonar System)

a.

Disengage the 9 clamps and remove the No. 4 engine room wire.

B448512


Hide 82114 9.REMOVE NO. 4 ENGINE ROOM WIRE (w/ Clearance Sonar System)

a.

Disengage the 9 clamps and remove the No. 4 engine room wire.

B448511


Hide 52040 10.REMOVE FRONT BUMPER HOLE COVER ASSEMBLY LH

a.
B448514E02
1.344,1.99 0.771,1.99 true 0.594,1.896 0.813,2.104 0.219,0.208 10 false *a

Disengage the 4 claws.

Text in Illustration
*a Hook


b.

Disengage the hook to remove the front bumper hole cover assembly LH.


Hide 52030 11.REMOVE FRONT BUMPER HOLE COVER ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 53115B 12.REMOVE RADIATOR GRILLE BRACKET

a.
B448515

Remove the 3 screws.


b.
B448516

Disengage the 4 claws to remove the radiator grille bracket.


Hide 53101 13.REMOVE RADIATOR GRILLE SUB-ASSEMBLY

a.
B448517

Remove the 2 screws.


b.
B448518

Disengage the 6 claws to remove the radiator grille sub-assembly.


Hide 53155D 14.REMOVE NO. 1 RADIATOR GRILLE SEAL

a.
B448523E02
0.885,1.125 0.885,1.49 true 0.802,1.479 1.104,1.719 0.302,0.24 10 false *a

Separate the double-sided tape and disengage the 2 clips to remove the No. 1 radiator grille seal.

Text in Illustration
*a Double-sided Tape


Hide 53145B 15.REMOVE RADIATOR GRILLE GARNISH CLIP

a.
B448524

Remove the 2 radiator grille garnish clips.


Hide 75311 16.REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM

a.
B448525

Disengage the 3 claws to remove the radiator grille (or front panel) emblem.


Hide 53152B 17.REMOVE RADIATOR GRILLE AIR GUIDE

a.
B448519

Remove the 4 screws.


b.
B448520

Disengage the 4 claws to remove the radiator grille air guide.


Hide 53112E 18.REMOVE NO. 1 LOWER RADIATOR GRILLE

a.
B448566

Remove the 3 screws.


b.
B448521

Disengage the 22 claws to remove the lower radiator grille sub-assembly.


c.
B448522

Disengage the 17 claws to remove the No. 1 lower radiator grille.


Hide 52116A 19.REMOVE FRONT BUMPER SIDE SUPPORT LH

a.
B448527

Remove the screw.


b.
B448529

Disengage the clip as shown in the illustration.


c.

Disengage the claw to remove the front bumper side support LH.


Hide 52115A 20.REMOVE FRONT BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure as for the LH side.


Hide 52544 21.REMOVE FRONT BUMPER SIDE SEAL LH

a.
B448574

Disengage the 2 claws to remove the front bumper side seal LH.


Hide 52543 22.REMOVE FRONT BUMPER SIDE SEAL RH

HINT:

Use the same procedure as for the LH side.


Hide 86520 23.REMOVE LOW PITCHED HORN ASSEMBLY

Hide 86510 24.REMOVE HIGH PITCHED HORN ASSEMBLY

Hide 52611 25.REMOVE FRONT BUMPER ENERGY ABSORBER

a.
B448530

Disengage the 4 guides to remove the front bumper energy absorber.


Hide 52021 26.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

a.
B448531

Disengage the 4 clamps.


b.
B448532

Remove the bolt.


c.
B448533

Remove the 8 bolts and front bumper reinforcement sub-assembly.