1.REMOVE FENDER PANEL MUDGUARD SUB-ASSEMBLY
Remove the screw.
Disengage the 2 clips and remove the fender panel mudguard sub-assembly.
If there is any damage, replace the clip with a new one.
2.REMOVE FRONT DOOR MUDGUARD SUB-ASSEMBLY
Disengage the 6 clips.
Remove the nut.
Disengage the 5 clips and remove the front door mudguard sub-assembly.
If there is any damage, replace the clip with a new one.
3.REMOVE SLIDE DOOR MUDGUARD SUB-ASSEMBLY
Disengage the 5 clips.
Remove the screw.
Disengage the 6 clips and remove the slide door mudguard sub-assembly.
If there is any damage, replace the clip with a new one.
4.REMOVE QUARTER PANEL MUDGUARD SUB-ASSEMBLY
Remove the 2 screws.
Disengage the clip and remove the quarter panel mudguard sub-assembly.
If there is any damage, replace the clip with a new one.
76932A
5.REMOVE NO. 1 SIDE MUDGUARD BRACKET
Remove the screw
Disengage the clip and remove the No. 1 side mudguard bracket.
76923
6.REMOVE SIDE MUDGUARD RETAINER
Remove the screw.
Disengage the clip and remove the side mudguard retainer.
53822G
7.REMOVE NO. 1 FRONT SIDE PANEL PROTECTOR (except Cold Area)
Remove the 2 No. 2 side mudguard retainers.
Remove the 3 screws and No. 1 front side panel protector.
53822G
8.REMOVE NO. 1 FRONT SIDE PANEL PROTECTOR (for Cold Area)
Remove the 2 No. 2 side mudguard retainers.
Remove the 4 screws and No. 1 front side panel protector.
53824C
9.REMOVE NO. 2 FRONT SIDE PANEL PROTECTOR (for Cold Area)
Remove the 3 No. 2 side mudguard retainers.
Remove the 3 screws and No. 2 front side panel protector.