When installing the mudguards, heat the vehicle body and mudguards using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Mudguards | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body, mudguards excessively.
53822G
1.INSTALL NO. 1 FRONT SIDE PANEL PROTECTOR
Install the 2 No. 2 side mudguard retainers.
Install the No. 1 front side panel protector with the 3 screws.
76923
2.INSTALL SIDE MUDGUARD RETAINER
Engage the clip.
Install the side mudguard retainer with the screw.
3.INSTALL QUARTER PANEL MUDGUARD SUB-ASSEMBLY
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Engage the 2 clips.
| *1 | Double-sided Tape |
Install the quarter panel mudguard sub-assembly with the 2 screws.
76932A
4.INSTALL NO. 1 SIDE MUDGUARD BRACKET
Engage the clip.
Install the No. 1 side mudguard bracket with the screw.
5.INSTALL SLIDE DOOR MUDGUARD SUB-ASSEMBLY
Engage the 8 upper claws as shown in the illustration.
Engage the 6 clips.
Install the screw.
Engage the 5 clips to install the slide door mudguard sub-assembly.
6.INSTALL FRONT DOOR MUDGUARD SUB-ASSEMBLY
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Engage the 7 upper claws as shown in the illustration.
Engage the 5 clips.
| *1 | Double-sided Tape |
Install the nut.
Engage the 6 clips to install the front door mudguard sub-assembly.
7.INSTALL FENDER PANEL MUDGUARD SUB-ASSEMBLY
Engage the 3 clips as shown in the illustration.
Install the fender panel mudguard sub-assembly with the 2 screws and clip.