Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
76926G
1.REMOVE SIDE MUDGUARD PROTECTOR
Remove the 6 side mudguard retainers and side mudguard protector from the front door mudguard.
76928A
2.REMOVE REAR SIDE MUDGUARD PROTECTOR
Remove the 6 side mudguard retainers and rear side mudguard protector from the slide door mudguard.
76921A
3.REMOVE NO. 1 SIDE MUDGUARD PROTECTOR (for Front Fender)
Separate the double-sided tape and remove the No. 1 side mudguard protector from the fender panel mudguard.
| *a | Double-sided Tape |
76919A
4.REMOVE SIDE MUDGUARD PAD (for Front Fender)
Separate the double-sided tape and remove the side mudguard pad from the fender panel mudguard.
| *a | Double-sided Tape |
76965
5.REMOVE FRONT DOOR LOWER MUDGUARD PROTECTOR
Separate the double-sided tape and remove the front door lower mudguard protector from the front door mudguard.
| *a | Double-sided Tape |
75732B
6.REMOVE FRONT DOOR OUTSIDE MOULDING
Separate the double-sided tape and remove the front door outside moulding from the front door mudguard.
| *a | Double-sided Tape |
76919C
7.REMOVE SIDE MUDGUARD PAD (for Front Door)
Separate the double-sided tape and remove the 4 side mudguard pads from the front door mudguard.
| *a | Double-sided Tape |
76966
8.REMOVE SLIDE DOOR LOWER MUDGUARD PROTECTOR
for Front Side:
Separate the double-sided tape and remove the slide door lower mudguard protector from the slide door mudguard.
| *a | Double-sided Tape |
for Rear Side:
Separate the double-sided tape and remove the slide door lower mudguard protector from the slide door mudguard.
| *a | Double-sided Tape |
75742E
9.REMOVE REAR DOOR OUTSIDE MOULDING
Separate the double-sided tape and remove the rear door outside moulding from the slide door mudguard.
| *a | Double-sided Tape |
76919D
10.REMOVE SIDE MUDGUARD PAD (for Rear Door)
Remove the 2 side mudguard pads from the slide door mudguard.
| *a | Double-sided Tape |
76922D
11.REMOVE NO. 2 SIDE MUDGUARD PROTECTOR (for Quarter Panel)
Separate the double-sided tape and remove the No. 2 side mudguard protector from the quarter panel mudguard.
| *a | Double-sided Tape |
76933
12.REMOVE NO. 5 SIDE MUDGUARD RETAINER
Separate the double-sided tape and remove the No. 5 side mudguard retainer from the quarter panel mudguard.
| *a | Double-sided Tape |
76935
13.REMOVE NO. 7 SIDE MUDGUARD RETAINER
Separate the double-sided tape and remove the No. 7 side mudguard retainer from the quarter panel retainer.
| *a | Double-sided Tape |
75861L
14.REMOVE NO. 1 ROCKER PANEL MOULDING RETAINER
Remove the side mudguard retainer.
Disengage the claw and remove the No. 1 rocker panel moulding retainer.