1.INSTALL NO. 1 OUTSIDE MOULDING RETAINER
Engage the claw.
Install the No. 1 outside moulding retainer with the side mudguard retainer.
2.INSTALL NO. 2 OUTSIDE MOULDING RETAINER
Clean the quarter panel mudguard.
Using a heat light, heat the quarter panel mudguard.
Remove the double-sided tape from the quarter panel mudguard.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 2 outside moulding retainer so that it is centered within the markings on the quarter panel mudguard.
| *a | Marking |
3.INSTALL NO. 3 OUTSIDE MOULDING RETAINER
Clean the quarter panel mudguard.
Using a heat light, heat the quarter panel mudguard.
Remove the double-sided tape from the quarter panel mudguard.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 3 outside moulding retainer so that it is centered within the markings on the quarter panel mudguard.
| *1 | Release Paper |
| *a | Marking |
76922D
4.INSTALL NO. 2 SIDE MUDGUARD PROTECTOR
Clean the quarter panel mudguard.
Using a heat light, heat the quarter panel mudguard.
Remove the double-sided tape from the quarter panel mudguard.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 2 side mudguard protector to the quarter panel mudguard as shown in the illustration.
| *a | Attachment Area |
76919A
5.INSTALL SIDE MUDGUARD PAD (for Rear Door)
Clean the slide door mudguard.
Using a heat light, heat the slide door mudguard.
Remove the double-sided tape from the slide door mudguard.
Wipe off any tape adhesive residue with cleaner.
Install 2 new side mudguard pads so that they are centered within the markings on the slide door mudguard.
| *a | Marking |
76966
6.INSTALL SLIDE DOOR LOWER MUDGUARD PROTECTOR
Clean the slide door mudguard.
Using a heat light, heat the slide door mudguard.
Remove the double-sided tape from the slide door mudguard.
Wipe off any tape adhesive residue with cleaner.
Install a new slide door lower mudguard protector to the slide door mudguard as shown in the illustration.
| *a | Attachment Area |
76919A
7.INSTALL SIDE MUDGUARD PAD (for Front Door)
Clean the front door mudguard.
Using a heat light, heat the front door mudguard.
Remove the double-sided tape from the front door mudguard.
Wipe off any tape adhesive residue with cleaner.
Install 4 new side mudguard pads so that they are centered within the markings on the front door mudguard.
| *a | Marking |
76965
8.INSTALL FRONT DOOR LOWER MUDGUARD PROTECTOR
Clean the front door mudguard.
Using a heat light, heat the front door mudguard.
Remove the double-sided tape from the front door mudguard.
Wipe off any tape adhesive residue with cleaner.
Install a new front door lower mudguard protector to the front door mudguard as shown in the illustration.
| *a | Attachment Area |
76919A
9.INSTALL SIDE MUDGUARD PAD (for Front Fender)
Install a new side mudguard pad to the fender panel mudguard.
76921A
10.INSTALL NO. 1 SIDE MUDGUARD PROTECTOR
Clean the fender panel mudguard.
Using a heat light, heat the fender panel mudguard.
Remove the double-sided tape from the fender panel mudguard.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 1 side mudguard protector to the fender panel mudguard as shown in the illustration.
| *a | Attachment Area |
76928A
11.INSTALL REAR SIDE MUDGUARD PROTECTOR
Install the rear side mudguard protector to the slide door mudguard with the 6 side mud guard retainers.
76926G
12.INSTALL SIDE MUDGUARD PROTECTOR
Install the side mudguard protector to the front door mudguard with the 6 side mud guard retainers.