Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
75861L
1.INSTALL NO. 1 ROCKER PANEL MOULDING RETAINER
Engage the claw to install the No. 1 rocker panel moulding retainer to the quarter panel mudguard.
Install the side mudguard retainer.
76935
2.INSTALL NO. 7 SIDE MUDGUARD RETAINER
Clean the quarter panel mudguard.
Remove any remaining double-sided tape from the quarter panel mudguard.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from a new No. 7 side mudguard retainer.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 7 side mudguard retainer as shown in the illustration.
| *a | Line |
| *b | Double-sided Tape |
Install the No. 7 side mudguard retainer along the line on the quarter panel mudguard.
Press the No. 7 side mudguard retainer firmly to install it.
76933
3.INSTALL NO. 5 SIDE MUDGUARD RETAINER
Clean the quarter panel mudguard.
Remove any remaining double-sided tape from the quarter panel mudguard.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from a new No. 5 side mudguard retainer.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 5 side mudguard retainer as shown in the illustration.
| *a | Application Sheet |
| *b | Line |
| *c | Double-sided Tape |
Install the No. 5 side mudguard retainer along the line on the quarter panel mudguard.
Press the No. 5 side mudguard retainer firmly to install it.
76922D
4.INSTALL NO. 2 SIDE MUDGUARD PROTECTOR (for Quarter Panel)
Clean the quarter panel mudguard.
Remove any remaining double-sided tape from the quarter panel mudguard.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from a new No. 2 side mudguard protector.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 2 side mudguard protector as shown in the illustration.
| *a | Attachment Area |
| *b | Double-sided Tape |
Press the No. 2 side mudguard protector firmly to install it.
76919D
5.INSTALL SIDE MUDGUARD PAD (for Rear Door)
Clean the slide door mudguard.
Remove any remaining double-sided tape from the slide door mudguard.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from 2 new side mudguard pads.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the 2 side mudguard pads as shown in the illustration.
| *a | Line |
| *b | Double-sided Tape |
Install each side mudguard pad along the line on the slide door mudguard.
Press each side mudguard pad firmly to install it.
75742E
6.INSTALL REAR DOOR OUTSIDE MOULDING
Clean the slide door mudguard.
Remove any remaining double-sided tape from the slide door mudguard.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from a new rear door outside moulding.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the rear door outside moulding as shown in the illustration.
| *a | Double-sided Tape |
Press the rear door outside moulding firmly to install it.
76966
7.INSTALL SLIDE DOOR LOWER MUDGUARD PROTECTOR
Clean the slide door mudguard.
Remove any remaining double-sided tape from the slide door mudguard.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from a new slide door lower mudguard protector.
After removing the release paper, keep the exposed adhesive free from foreign matter.
for Front Side:
Install the slide door lower mudguard protector as shown in the illustration.
| *a | Attachment Area |
| *b | Double-sided Tape |
Press the slide door lower mudguard protector firmly to install it.
for Rear Side:
Install the slide door lower mudguard protector as shown in the illustration.
| *a | Double-sided Tape |
Press the slide door lower mudguard protector firmly to install it.
76919C
8.INSTALL SIDE MUDGUARD PAD (for Front Door)
Clean the front door mudguard.
Remove any remaining double-sided tape from the front door mudguard.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from 4 new side mudguard pads.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the 4 side mudguard pads as shown in the illustration.
| *a | Line |
| *b | Double-sided Tape |
Install each side mudguard pad along the line on the front door mudguard.
Press each side mudguard pad firmly to install it.
75732B
9.INSTALL FRONT DOOR OUTSIDE MOULDING
Clean the front door mudguard.
Remove any remaining double-sided tape from the front door mudguard.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from a new front door outside moulding.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the front door outside moulding as shown in the illustration.
| *a | Double-sided Tape |
Press the front door outside moulding firmly to install it.
76965
10.INSTALL FRONT DOOR LOWER MUDGUARD PROTECTOR
Clean the front door mudguard.
Remove any remaining double-sided tape from the front door mudguard.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from a new front door lower mudguard protector.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the front door lower mudguard protector as shown in the illustration.
| *a | Attachment Area |
| *b | Double-sided Tape |
Press the front door lower mudguard protector firmly to install it.
76919A
11.INSTALL SIDE MUDGUARD PAD (for Front Fender)
Clean the fender panel mudguard.
Remove any remaining double-sided tape from the fender panel mudguard.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from a new side mudguard pad.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the side mudguard pad as shown in the illustration.
| *a | Double-sided Tape |
Press the side mudguard pad firmly to install it.
76921A
12.INSTALL NO. 1 SIDE MUDGUARD PROTECTOR (for Front Fender)
Clean the fender panel mudguard.
Remove any remaining double-sided tape from the fender panel mudguard.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from a new No. 1 side mudguard protector.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 1 side mudguard protector as shown in the illustration.
| *a | Attachment Area |
| *b | Double-sided Tape |
Press the No. 1 side mudguard protector firmly to install it.
76928A
13.INSTALL REAR SIDE MUDGUARD PROTECTOR
Install the rear side mudguard protector to the slide door mudguard with the 6 side mudguard retainers.
76926G
14.INSTALL SIDE MUDGUARD PROTECTOR
Install the side mudguard protector to the front door mudguard with the 6 side mudguard retainers.