Home › Vehicle Interior › SLIDING ROOF › SLIDING ROOF SWITCH ASSEMBLY
RM24M0E _58 Vehicle Interior _059597 SLIDING ROOF _0292255 SLIDING ROOF SWITCH ASSEMBLY G

SLIDING ROOF  SLIDING ROOF SWITCH ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81260A 1.INSPECT MAP LIGHT ASSEMBLY

B135700E02
2.87,3.706 3.211,3.850 0.341,0.144 10 OPN 0.268,4.403 0.568,4.547 0.299,0.144 10 CLS 0.34,3.688 0.468,3.830 0.128,0.142 10 E 0.608,4.476 1.012,4.164 false 0.499,3.776 1.178,4.033 false 2.054,3.999 2.849,3.784 false

a.

Measure the resistance of the switch.

Standard resistance:
Tester Connection Switch Condition Specified Condition
3 (OPN) - 7 (E) Front sliding roof control switch is OPEN Below 1 Ω
8 (CLS) - 7 (E) Front sliding roof control switch is CLOSE Below 1 Ω
3 (OPN) - 7 (E)
8 (CLS) - 7 (E)
Front sliding roof control switch is OFF 10 kΩ or higher


If the result is not as specified, replace the map light assembly.