2011-2016 FJ Cruiser · Service Manual HEATER & AIR CONDITIONING SYSTEM

DISASSEMBLY

Removal / installation · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


1. REMOVE MODE CONTROL SERVO MOTOR

  1. I102451
    Remove the 3 screws and remove the mode control servo motor.


2. REMOVE AIR MIX CONTROL SERVO MOTOR

  1. I102452
    Remove the 3 screws and remove the air mix control servo motor.


3. REMOVE COOLER UNIT DRAIN HOSE

  1. I102455
    Remove the cooler unit drain hose.


4. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY

  1. I102453
    Remove the screw and clamp.

  1. Remove the heater radiator unit from the heater case.


5. REMOVE COVER PLATE

  1. I102456
    Remove the screw.

  1. Disengage the claw and remove the cover plate.


6. REMOVE AIR CONDITIONING TUBE ASSEMBLY

I102457
  1. Using a hexagon wrench 4, remove the 2 hexagon bolts and remove the air conditioning tube.

  1. Remove the 2 O-rings from the air conditioning tube.


7. REMOVE COOLER EXPANSION VALVE

I102458
  1. Remove the cooler expansion valve from the cooler evaporator.


8. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

  1. I102459
    Remove the 2 screws and remove the plate.

  1. I102460
    Remove the 8 screws and separate the heater case.

  1. I102461
    Remove the cooler evaporator.
    Remove the 2 O-rings from the cooler evaporator.


9. REMOVE NO. 1 COOLER THERMISTOR

I102462
  1. Remove the cooler thermistor from the cooler evaporator.

← REMOVAL (from Aug 2013)DISASSEMBLY (from Nov 2010) →