2011-2016 FJ Cruiser · Service Manual HEATER & AIR CONDITIONING SYSTEM

DISASSEMBLY

Removal / installation · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


1. REMOVE MODE CONTROL SERVO MOTOR

  1. I102451
    Remove the 3 screws and the mode control servo motor.


2. REMOVE AIR MIX CONTROL SERVO MOTOR

  1. I102452
    Remove the 3 screws and the air mix control servo motor.


3. REMOVE COOLER UNIT DRAIN HOSE

  1. I102455
    Remove the cooler unit drain hose.


4. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY (for LHD)

  1. I102453
    Remove the screw and clamp.

  1. Remove the heater radiator unit from the heater case.


5. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY (for RHD)

  1. I105854
    Remove the 2 screws and disengage the guide.

  1. Remove the heater radiator unit from the heater case.


6. REMOVE COVER PLATE

  1. I102456
    Remove the screw.

  1. Disengage the claw and remove the cover plate.


7. REMOVE AIR CONDITIONING TUBE ASSEMBLY

I102457
  1. Using a hexagon wrench 4, remove the 2 hexagon bolts, the air conditioning tube.

  1. Remove the 2 O-rings from the air conditioning tube.


8. REMOVE COOLER EXPANSION VALVE

I102458
  1. Remove the cooler expansion valve from the cooler evaporator.


9. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

  1. I102459
    Remove the 2 screws and the plate.

  1. I102460
    Remove the 8 screws and separate the heater case.

  1. Remove the cooler evaporator.

  1. I102461
    Remove the 2 O-rings from the cooler evaporator.

  1. Remove the cover plate.


10. REMOVE NO. 1 COOLER THERMISTOR (for LHD)

  1. I102462
    Remove the cooler thermistor from the cooler evaporator.


11. REMOVE NO. 1 COOLER THERMISTOR (for RHD)

  1. I105860
    Remove the cooler thermistor from the cooler evaporator.

← DISASSEMBLY (Jul 2007 – Oct 2010)INSPECTION (from Jul 2007) →