2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


1. INSTALL COMBINATION METER ASSEMBLY
  1. Connect the 2 connectors and the clamp.

  1. Install the combination meter assembly with the 4 screws.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }


2. INSTALL INSTRUMENT CLUSTER FINISH PANEL (for LHD)
  1. Connect the connectors.

  1. Engage the 3 clips and the 4 claws and install the instrument cluster lower finish panel.


3. INSTALL INSTRUMENT CLUSTER FINISH PANEL (for RHD)
  1. Connect the connectors.

  1. Engage the 8 clips and install the instrument cluster lower finish panel.


4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for LHD)
  1. Engage the 5 clips and claw and install the lower instrument panel finish panel.

  1. Install the 2 <E> bolts.


5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)
  1. Connect the connectors.

  1. Engage the 8 clips and 4 guides and install the lower instrument panel finish panel.

  1. Install the 2 <E> bolts.


6. INSTALL INSTRUMENT PANEL FINISH PLATE

  1. E149563E03
    Install the instrument panel finish plate.
    Text in Illustration 
    *1
    Instrument Panel Finish Plate


7. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY (for RHD)
  1. Engage the 3 claws and install the fuel lid lock open lever.


8. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
  1. Engage the 3 claws and install the hood lock control lever.


9. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
  1. Engage the 4 clips and 2 claws and install the instrument panel register.


10. INSTALL INSTRUMENT PANEL GARNISH LH (for LHD)
  1. Engage the 3 clips and install the instrument panel garnish.

  1. Install the screw <G>.


11. INSTALL INSTRUMENT PANEL GARNISH RH (for RHD)
  1. Engage the 3 clips and install the instrument panel garnish.

  1. Install the screw <G>.


12. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
  1. Install the front door opening trim weatherstrip.


13. INSTALL COWL SIDE TRIM BOARD LH
  1. Engage the 2 claws and install the cowl side trim board.

  1. Install the clip.


14. INSTALL FOOTREST CLIP (for LHD)

B130588

HINT:
Use the same procedure for both sides.

  1. Engage the 2 claws and install the footrest clip.


15. INSTALL FRONT FLOOR FOOTREST (for LHD)

  1. B130589
    Engage the 2 studs and install the front floor footrest.


16. INSTALL FRONT DOOR SCUFF PLATE LH
  1. Engage the 14 claws and install the door scuff plate.

← INSTALLATION (Jul 2007 – Oct 2010)COMPONENTS (from Jul 2007) →