REMOVAL
Removal / installation · Vehicles built from Jul 2007
| 2.
DRAIN BRAKE FLUID |
 |
- NOTICE:
- Immediately wash off any brake fluid that comes into contact with any painted surfaces.
| 3.
SEPARATE REAR FLEXIBLE HOSE |
 |
Remove the union bolt and gasket and separate the flexible hose from the disc brake cylinder.
- HINT:
- Use a container to collect the brake fluid as it drains out.
| 4.
REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY |
 |
Remove the 2 slide pins and remove the disc brake cylinder from the disc brake cylinder mounting.
| 5.
REMOVE REAR DISC BRAKE PAD |
 |
Remove the 2 disc brake pads with anti squeal shim from the disc brake cylinder mounting.
| 6.
REMOVE REAR DISC BRAKE ANTI SQUEAL SHIM |
 |
Remove the 2 anti squeal shims from each brake pad.
| 7.
REMOVE REAR DISC BRAKE PAD WEAR INDICATOR PLATE |
 |
Remove the indicator plate from the inner side of the brake pad.
| 8.
REMOVE REAR DISC BRAKE PAD SUPPORT PLATE |
 |
Remove the 4 pad support plates from the disc brake cylinder mounting.
| 9.
REMOVE REAR DISC BRAKE CYLINDER MOUNTING |
 |
Remove the 2 bolts and disc brake cylinder mounting.
| 10.
REMOVE REAR DISC BRAKE CYLINDER SLIDE BUSH |
 |
Remove the slide bush from the disc brake cylinder mounting.
| 11.
REMOVE REAR DISC BRAKE BUSH DUST BOOT |
 |
Remove the dust boot from the disc brake cylinder mounting.
| 12.
REMOVE REAR DISC BRAKE CYLINDER HOLE PLUG |
 |
Remove the hole plug from the disc brake cylinder mounting.
| 13.
REMOVE REAR DISC |
 |
Place matchmarks on the disc and axle hub and remove the disc.