2011-2016 FJ Cruiser · Service Manual BRAKE

DISASSEMBLY

Removal / installation · Vehicles built from Jul 2007


1. REMOVE CYLINDER BOOT

F043127
  1. Using a screwdriver, remove the cylinder boot from the disc brake cylinder.


2. REMOVE REAR DISC BRAKE PISTON

F043128
  1. Place a shop rag or piece of cloth between the piston and disc brake cylinder.

  1. Apply compressed air to remove the piston from the disc brake cylinder.

    CAUTION:
    Do not place your fingers in front of the piston when applying compressed air.

    NOTICE:
    Do not spatter the brake fluid.


3. REMOVE PISTON SEAL

F043129
  1. Using a screwdriver, remove the piston seal from the disc brake cylinder.

    NOTICE:
    Do not damage the inner surface or piston seal groove of the cylinder.


4. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

5. REMOVE REAR DISC BRAKE BLEEDER PLUG
← REMOVAL (from Jul 2007)INSPECTION (from Jul 2007) →