2011-2016 FJ Cruiser · Service Manual ENGINE

CHECK FOR INTERMITTENT PROBLEMS

Troubleshooting · Vehicles built from Aug 2009

Versions by build date: Jul 2007 – Jul 2009 from Aug 2009

HINT:
Intelligent tester only:

Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with an intelligent tester when the ECM is in check mode. In check mode, the ECM uses 1trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2trip detection logic.
  1. Clear DTCs (Click here).
  2. Switch the ECM from normal mode to check mode using an intelligent tester (Click here).
  3. Perform a simulation test (Click here).
  4. Check and wiggle the harness(es), connector(s) and terminal(s) (Click here).
← CHECK FOR INTERMITTENT PROBLEMS (Jul 2007 – Jul 2009)BASIC INSPECTION (from Jul 2007) →