REMOVAL
Removal / installation · Vehicles built Jul 2007 – Jul 2009
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 2.
REMOVE V-BANK COVER
|
 |
Remove the 2 nuts, then remove the V-bank cover.
| 3.
REMOVE AIR CLEANER ASSEMBLY
|
 |
Disconnect the No. 2 ventilation hose.
- Disconnect the vacuum hose.
Disconnect the mass air flow meter connector.
Disengage the 2 wire harness clamps.
- Loosen the 2 hose clamps.
Remove the 2 bolts.
Disconnect the air cleaner hose and remove the air cleaner.
| 4.
REMOVE OIL BAFFLE PLATE
|
 |
- Remove the bolt and the oil baffle plate.
| 5.
REMOVE NO. 1 SURGE TANK STAY
|
 |
- Remove the 2 bolts and the No. 1 surge tank stay.
| 6.
DISCONNECT VENTILATION HOSE |
 |
Disconnect the ventilation hose from the intake air surge tank.
| 7.
REMOVE IGNITION COIL ASSEMBLY |
 |
For Bank 1:
Disconnect the 3 connectors.
Remove the 3 bolts, then remove the 3 ignition coils.
- For Bank 2:
Disconnect the 3 connectors.
Remove the 3 bolts, then remove the 3 ignition coils.