2011-2016 FJ Cruiser · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Jul 2007 – Jul 2009

Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Jul 2014 from Aug 2014


1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY

A078644E03
  1. Apply a light coat of spindle oil or gasoline to a new O-ring and install it onto the fuel pressure pulsation damper.

  1. Install the fuel pressure pulsation damper onto the fuel delivery pipe.

  1. Install the clip.


2. INSPECT FOR FUEL LEAK
  1. Connect the Techstream to the DLC3.

  1. Turn the ignition switch ON.

    NOTICE:
    Do not start the engine.

  1. Turn the Techstream ON.

  1. Select the following menu items: Powertrain / Engine and ECT / Active Test / Activate the Fuel Pump Speed Control / ON.

  1. Check that there is no leakage from the fuel system.


3. INSTALL V-BANK COVER

  1. A126475
    Install the V-bank cover with the 2 nuts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }

← REMOVAL (from Aug 2014)INSTALLATION (Aug 2009 – Jul 2014) →