2011-2016 FJ Cruiser · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Jul 2014 from Aug 2014


1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY

  1. A225470E02
    Apply a light coat of spindle oil or gasoline to a new O-ring and install it onto the fuel pressure pulsation damper.
    Text in Illustration 
    *1
    New O-Ring

  1. Install the fuel pressure pulsation damper into the fuel delivery pipe.

  1. Install the fuel pressure regulator holder.


2. INSTALL INTAKE AIR SURGE TANK
  1. Install the intake air surge tank (Click here).


3. INSPECT FOR FUEL LEAK
  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch to ON.

    NOTICE:
    Do not start the engine.

  1. Turn the intelligent tester ON.

  1. Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Fuel Pump Speed / ON.

  1. Check fuel pump operation.

    1. Check for pressure in the fuel inlet tube from the fuel line. Check that the sound of fuel flowing in the fuel tank can be heard.
      If there is no sound, check the integration relay, fuel pump, ECM and wiring connector.

← INSTALLATION (Aug 2009 – Jul 2014)COMPONENTS (Jul 2007 – Jul 2009) →