REMOVAL
Removal / installation · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012
| 1.
PRECAUTION |
 |
- CAUTION:
- Read "PRECAUTION" thoroughly before servicing (Click here).
| 2.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
| 3.
REMOVE INSTRUMENT PANEL GARNISH LH
|
 |
- Remove screw <H>.
Disengage the 3 clips and remove the instrument panel garnish.
- NOTICE:
- Pull the instrument panel garnish up at an angle of 45° to remove it.
- Do not damage the surface of the instrument panel when removing it.
| 4.
REMOVE INSTRUMENT PANEL GARNISH RH
|
 |
- Remove screw <H>.
Disengage the 3 clips and remove the instrument panel garnish.
- NOTICE:
- Pull the instrument panel garnish up at an angle of 45° to remove it.
- Do not damage the surface of the instrument panel when removing it.
| 5.
REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
|
 |
- Remove the 2 <H> screws.
Disengage the 4 clips and remove the integration control panel assembly.
Disconnect the 3 connectors.
| 6.
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
|
 |
- Remove the shift lever knob.
| 7.
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
|
 |
- Remove the shift lever knob.
| 8.
REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY
|
 |
Disengage the 2 A claws and 2 B claws.
Slide the parking brake hole cover toward the front of the vehicle, disengage the 2 C claws and remove the parking brake hole cover.
| 9.
REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
|
 |
- Shift the shift lever into the N position.
Disengage the 5 clips and 3 claws and remove the console upper rear panel.
| 10.
REMOVE BOX BOTTOM MAT
|
 |
- Remove the box bottom mat.
| 11.
REMOVE FRONT CONSOLE BOX
|
 |
- Remove the 4 <D> bolts.
Disengage the 5 claws and remove the console box.
| 12.
REMOVE CONSOLE UPPER PANEL NO.1 GARNISH
|
 |
Disengage claw A and the clip.
Slide the console upper panel garnish toward the rear of the vehicle, disengage the claw B and remove the console upper panel garnish.
| 13.
REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY
|
 |
- Remove the 2 clips and 2 <F> bolts.
Disengage the 3 clips and 2 claws and remove the instrument lower cover.
| 14.
REMOVE CENTER AIRBAG SENSOR ASSEMBLY |
 |
- Disconnect the holder (with connectors) from the center airbag sensor assembly.
- Remove 3 bolts and the center airbag sensor assembly.